1.の紹介弾力性のあるシートシールゲートバルブ
弾力性のあるシートシールゲートバルブ are also called lifting stem gate valves, also called rising stem gate valves. Usually there is a trapezoidal thread on the lifting rod, through the nut on the top of the valve and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is changed into operating thrust. The opening and closing part of 弾力性のあるシートシールゲートバルブ is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. It can only be fully opened and closed, but cannot be adjusted or throttled. The 弾力性のあるシートシールゲートバルブ produced by Milestone Valve Company have stable performance and are used in various fields such as petroleum, chemical industry, and water conservancy.
2.の技術的パラメータ弾力性のあるシートシールゲートバルブ
バルブの種類 |
弾力性のあるシートシールゲートバルブ |
DN |
DN50~DN1600 |
PN(MPa) |
1.0~2.5Mpa、4.0~16Mpa、 |
設計温度範囲 |
-15℃~425℃ |
該当する媒体 |
水、油、ガス、およびさまざまな腐食媒体 |
接続タイプ: |
フランジ付き |
アクチュエータタイプ |
手動駆動、空気圧、油圧または電気アクチュエータ |
スペアパーツ |
材料 |
Bodyã€Bonnetã€Disc |
鋳鉄、ダクタイル鋳鉄、鋳鋼、ステンレス鋼、 |
幹 |
ステンレス鋼 |
シール面 |
ブロンズ、ステンレス鋼、硬質合金NBR、epdm |
シーリングシム |
強化されたフレキシブルグラファイト、1Cr13 /フレキシブルグラファイト |
梱包 | Oリング、フレキシブルグラファイト |
3.Key points of operation of 弾力性のあるシートシールゲートバルブ:
1) The opening and closing direction of 弾力性のあるシートシールゲートバルブ should always be closed clockwise.
2. Pneumatic valves in the 弾力性のあるシートシールゲートバルブ pipe network are often opened and closed manually, and the number of opening and closing revolutions should not be too much, that is, large-diameter valves should also be within 200-600 revolutions.
3) 弾力性のあるシートシールゲートバルブ In order to facilitate the opening and closing operation of one person, the larger opening and closing torque should be 240N-m under the pressure of the pipeline.
4) The opening and closing end of 弾力性のあるシートシールゲートバルブ should be a square tenon, with standardized dimensions, and face the ground so that people can directly operate it from the ground. Valves with roulette are not suitable for underground pipe networks.
4.梱包と配送
5.よくある質問
1.バルブのサンプル注文はできますか?
A:はい、品質をテストおよびチェックするためのサンプル注文を歓迎します。混合サンプルを受け入れます。
2.バルブの注文にMOQの制限はありますか?
A:MOQが低く、サンプルチェック用に1台のPCを使用できます。
3. OEMサービスを提供できますか?
A:はい、OEMはご利用いただけます。
4.支払いはどうですか?
A:通常30%のデポジットを受け付けており、残額は発送前に支払われます。 L7CはOKです
5.バタフライバルブの納期はどうですか?
A:ほとんどのサイズ、DN50-DN600には、バルブ部品の在庫があります。最寄りの港である天津に1〜3週間でお届けできます。
6.あなたの製品の保証は何ですか?
A:通常、12か月のサービス保証、または出荷日から18か月の保証を提供します。
7.製品の標準化は何ですか?
A:GB / T12238-2008、JBfT 8527-1997、API 609、EN 593-1998、DIN 85003-3-1997
6.連絡先情報